PIXMA GM4070

Print

Print Head / Ink

Type

Permanent (Replaceable)

Number of Nozzles

Black: 640 nozzles (Optional Colour: 1152 nozzles)

Ink Bottles / Ink Cartridges

GI-70 (Pigment Black)
Optional: CL-741, CL741XL

Maximum Printing Resolution

600 (horizontal) x 1200 (vertical) dpi

Print Speed*1 (Approx.)

Based on ISO/IEC 24734
Click here for summary report
Click here for Document Print and Copy Speed Measurement Conditions

Document (ESAT/Simplex)

13 / 6.8 ipm (mono/colour)

Photo (4 x 6") (PP-201/Borderless)

-

Printable Width

Up to 203.2 mm (8")

Printable Area

Bordered Printing

#10 Envelope/DL Envelope:
Top margin: 8 mm, Bottom margin: 12.7 mm Left/Right 5.6 mm

LTR/LGL:
Top margin: 3 mm, Bottom margin: 5 mm
Left margin: 6.4mm, Right margin: 6.3 mm

Others:
Top margin: 3 mm, Bottom margin: 5 mm
Left/Right margin: 3.4 mm

Bordered Auto 2-Sided Printing

Top/Bottom margin: 5 mm
Left/Right margin: 3.4 mm
(LTR: Left: 6.4 mm, Right: 6.3 mm)

Support Media

Rear Tray

Plain Paper (64 - 105 g/m²)
High Resolution Paper (HR-101N)
Envelope

Cassette

Plain Paper (64 - 105 g/m²)

Paper Size

Rear Tray

A4, A5, B5, LTR, LGL, Envelopes (DL, COM10), Card Size (91 x 55 mm)

[Custom size]
width 55 - 215.9 mm, length 89 - 676 mm

* F4 is possible via custom size settings.

Cassette

A4, A5, B5, LTR

[Custom size]
width 148.0 - 215.9 mm, length 210 - 297 mm

* F4 is possible via custom size settings.

Paper Handling (Maximum Number)

Rear Tray

Plain Paper (A4, 64 g/m²) = 100
High Resolution Paper (HR-101N) = 80

Cassette

Plain Paper (A4, 64 g/m²) = 250

Support Media for Auto 2-sided printing

Type

Plain Paper

Size

A4, A5, B5, LTR

Paper Weight

Rear Tray

Plain Paper: 64 - 105 g/m²

Cassette

Plain Paper: 64 - 105 g/m²

Ink End Sensor

Electrode type and dot count type combined
Optional Colour Cartridge; Dot count

Print Head Alignment

Auto/Manual

Scan*2

Copy

Network

Protocol

SNMP, HTTP, TCP/IP (IPv4/IPv6)

Wired LAN

Network Type

IEEE802.3u (100BASE-TX)
IEEE802.3 (10BASE-T)

Data Rate

10M/100Mbps (Auto switchable)

Wireless LAN

Network Type

IEEE802.11b/g/n
2.4 GHz, Supported Channels: 1 - 13
(TW/HK: Supported Channels: 1 - 11 only)

Range

Indoor 50 m (depends on the transmission speed and conditions)

Security

WEP 64/128 bit
WPA-PSK (TKIP/AES)
WPA2-PSK (TKIP/AES)

Direct Connection (Wireless LAN)

Available

Printing Solutions

System Requirements*6

Windows 10 / 8.1 / 7 SP1
(operation can only be guaranteed on a PC with a pre-installed Windows 7 or later)

Mac: N/A

General Specifications

Page Yield*11

Plain Paper 
Click here for more information

A4 Monochrome Documents*12:
GI-70 PGBK: 6,000 (Economy Mode*13 8,300)

A4 Colour Documents*14:
Optional:
CL-741: 180
CL-741XL: 400

  1. Document print speeds are the average of ESAT (Word, Excel, PDF) in Office Category Test for the default simplex mode, ISO/IEC 24734.
    Photo print speed is based on the default setting using ISO/JIS-SCID N2 on Photo Paper.
    Plus Glossy II and does not take into account data processing time on host computer.
    Print speed may vary depending on system configuration, interface, software, document complexity, print mode, page coverage, type of paper used etc.
  2. TWAIN driver (ScanGear) is based on the TWAIN specification V1.9 and requires the Data Source Manager comes with the operating system.
  3. Optical resolution is a measure of maximum hardware sampling resolution, based on ISO 14473 standard.
  4. The fastest speed in Hi-Speed USB on Windows PC. Transfer time to computer is not included.
  5. Copy speeds are the average of sFCOT and sESAT, ISO/IEC 29183.
    Copy speeds (ADF) are ESAT of copy in sequence, ISO/IEC24735.
    Copy speed may vary depending on document complexity, copy mode, page coverage, type of paper used etc. and does not take into account warm-up time.
  6. Please visit https://asia.canon/support to check OS compatibility and to download the latest driver updates.
  7. The performance of the printer may be reduced under certain temperature and humidity conditions.
  8. For the temperature and humidity conditions of papers such as photo paper, refer to the paper's packaging or the supplied instructions.
  9. Acoustic Noise is measured based on ISO 7779 standard with default setting.
  10. Print: When printing ISO/JIS-SCID N2 on A4 size plain paper using default settings.
  11. Page yields may vary depending on content coverage, print settings, temperature, humidity, and frequency of printing.
  12. Declared yield value is the estimated value based on Canon individual test method using the ISO/IEC 19752 monochrome chart and continuous printing simulation with the replacement ink bottle after initial setup.
  13. The Economy mode reduces the ink consumption by lowering the density. More pages can be printed using this mode.
  14.  Declared yield value is in accordance with ISO/IEC 24711, using the ISO/IEC 24712 colour chart. Values obtained by continuous printing.
    This product is a monochrome inkjet printer.
    Print colour document with optional colour cartridge.
    Once the installed colour cartridge is empty, please replace with the contact protector or a new colour cartridge.

Disclaimer
  • To maintain optimal printer performance, Canon printer automatically perform cleaning based on its condition. During this cleaning process, a small amount of ink is consumed, which may include all colours of ink.
    [Cleaning Function]
    The cleaning function helps remove air bubbles or clogs from the print head nozzles, preventing degradation in print quality or nozzle blockages.
  • Replacement parts for printers will be available for five years after production is discontinued. Depending on your model, we may recommend replacing it with a new unit or one that offers similar performance as part of our maintenance service. In such cases, you may find that supplies or accessories for your model are no longer available, or that compatible operating systems may change.
  • To achieve optimal print quality, use the ink within six months of opening.
  • Depending on your device, whether it is a computer or a smartphone and its operating system, the estimated ink level information displayed on your screen may differ from what appears on the printer's operation panel. Additionally, some parts of the estimated ink level message shown on the printer may not be visible or may appear at different times. Canon recommends using the information displayed on the printer's operation panel as your primary reference, noting that this information serves only as a guideline.
  • Even when black-only or greyscale printing is selected, colour inks may still be consumed depending on the printing material and driver settings. When the ink level in any tank falls below the lower limit line, Canon recommends refilling that tank with the corresponding colour ink.
  • During the initial printer setup, a portion of ink is used to fill the print head's nozzles. As a result, the page yield of the initial bundled set of ink bottles will be lower than that of the subsequent set.
  • The estimated page yield and/or print cost stated in brochures, catalogues, websites, and similar materials are based not on the initial set of bundled ink bottles, but on subsequent sets after the print head nozzles have been filled with ink from the initial set of ink bottles.
  • For warranty details, please contact a Canon authorised sales representative in your country or region. The warranty covers only the main printer body and excludes consumables such as print media and ink/ink bottles even during the warranty period.
  • Please note that if the printer malfunctions or breakdown due to the usage of non-genuine ink bottles, repair charges will apply, even if the claim is made within the warranty period.
  • Please be aware that if a problem arises from using non-genuine ink bottles (including those refilled with non-genuine ink through methods such as making a hole in the bottle), a fee will be charged for repairs, even during the warranty period. Keep this in mind when using non-genuine ink.