Solution
You can choose the subject you want to focus on and shoot.
IMPORTANT
The following explanations are provided based on the assumption that the [Shooting Mode] is set to [Program AE] (
).
- [Servo AF] is set to [On] and cannot be changed.
- Tracking may not be possible when subjects are too small or move too rapidly, or when subject color or brightness matches that of the background too closely.
- [AF-Point Zoom] on the [
] tab is not available.
- [Macro] (
) is not available.
- In order to use [Tracking AF] the camera must be set to one of the following modes:
-
,
,
,
,
,
,
,
,
,
,
,
,
1. Press the power button to turn the camera on.
2. Press the <
> button.
3. The following screen appears.
Press the <
><
> to select the [Shooting] (
) tab.
Press the <
><
> buttons or turn the <Control dial> to choose [AF Frame], and then press the <
><
> buttons to move right/left to select [Tracking AF].
After making the setting, press the <
> button.
4. The following window appears.
5. Aim the camera so that [
] is on the desired subject, and then press the <
> button.
- When the subject is detected, the camera beeps and [
] is displayed. Even if the subject moves, the camera will continue to track the subject within a certain range.
- If no subject is detected, [
] is displayed.
REFERENCE
- To cancel tracking, press the <> button again.
6. Press the shutter button halfway. (
) changes to a blue (
) which follows the subject as the camera continues to adjust the focus and exposure (Servo AF).
7. Press the shutter button all the way down to shoot.
- Even after your shot, [
] is still displayed and the camera continues to track the subject.
NOTE
- When shooting in [MF] mode, press and hold the <> button for at least one second.
- If [Face ID] is set to [On], names will not display when registered people are detected, but the names will be recorded in the still images. However, a name will display if the subject chosen to focus on is the same as a person detected with Face ID.
