Firmware VB-R11VE/VB-R11/VB-R10VE Ver. 1.2.4

Hệ điều hành

Ngôn ngữ

Chi tiết

Firmware Version 1.2.4 incorporates the following fixes:
1. Minor bug fixes.

When updating to this firmware, please use the firmware files listed below, as well as the latest Camera Management Tool.
The latest Camera Management Tool and its manual will need to be downloaded separately.
<Firmware file>
[1] vbr11v124.bin
[2] font-vbr11v120.bin
<Camera Management Tool>
- CCMTInstall.exe

The firmware contains software modules developed by third parties. The details are available in the download: Readme-E.txt. The Third-party Software License (ThirdPartySoftware-E.pdf) and the license conditions are available in the OpenSourceSoftware Folder which is inside the LICENSE folder.

Lịch sử cập nhật

Ver. 1.2.3
1. Fixed a bug that an image taken in the past could be sent instead of the still image being obtained.
2. Minor bug fixes.

Ver. 1.2.0
1. Improved Scream Detection capabilities.
2. Added support for selecting whether to use Audio Input or not, and which Audio Communication Method to use.
3. Added support for recording with any ONVIF profile.
4. Added support for using specified PresetToken when creating a new preset using ONVIF PTZ Service.
5. Changed to save the following items when initializing the camera while retaining the network settings;
Administrator Name, Password, Network Settings, NTP Server, HTTP Server, Host Access Restrictions, Time Zone, Certificates, Private Key, and IPsec.
6. Changed the setting items and values of "motion priority", one of Simple Camera Settings functions.
- [Exposure] "Auto (Shutter-priority AE)" => "Auto"
- [Shutter Speed] "1/1000" => [Shutter Speed Limit (Lower)] "1/1000"
[Shutter Speed Limit (Upper)] "1/16000"
7. Changed the factory default settings.
Previous settings will be maintained after updating the firmware.
- [IPv4 Address Settings Method] in the [IPv4]
Before update: "Manual" => After update: "Auto (DHCP)"
- [Set Name Server Address Automatically] in the [DNS]
Before update: "Disable" => After update: "Use DHCP/DHCPv6"
- [Guest User] in [User Authority]
Before update: [Camera Control] ON => After update: [Camera Control] OFF
[Video Distribution] ON => [Video Distribution] OFF
[Audio Distribution] ON => [Audio Distribution] OFF
- [Camera Name (Unicode characters)] in the [Camera Name]
Before update: "Camera" => After update: model name
- [Focus] in the [Camera Settings]
Before update: "Manual" => After update: "Auto"
- [Day/Night] in the [Camera Settings]
Before update: "Day Mode" => After update: "Auto"
- [Overwrite videos] in the [Memory Card Operations]
Before update: "Disable" => After update: "Enable"
8. Took measures against the problem that the infrared filter did not react in switching Day/Night.
9. Added support for Korean Language.
10. Added support for on-screen display of Korean language.

Ver. 1.1.8
1. The factory default settings have changed. Previous settings will be maintained, when updating the firmware.
- [User Name (Administrator ID)] / [Administrator Name]
After update: Not registered
- [Administrator Password]
After update: Not registered

Ver. 1.1.5
1. Added One-shot AF function on Camera Viewer and Mobile Camera Viewer.
2. Fixed bugs of viewer operation and others when using Windows Server 2008. (Ex. Security warning is displayed. / Unavailable to use H.264 or audio transmission.) If these problems can not be solved in this version, please download and install "Root certificate installer".
3. Fixed a bug that video could not be displayed on the viewer in some versions of Chrome.
4. Fixed a bug that an error occurred in downloading videos using Recorded Video Utility when Daylight Saving Time is set.

Ver. 1.1.2
1. Fixed a bug of time synchronization with NTP Server.

Ver. 1.1.0
1. The camera's support for the Windows 8/ Windows 8 Pro/ Windows 8 Enterprise 32/64 bit, has ended, due to Microsoft's ending support of these OSs.
2. Added support for Windows Server 2016.
3. Unified the Admin Viewer, VB Viewer, and Camera Viewer.
4. The Admin Viewer settings/ Admin Tools have been merged with the Setting Page.
5. The Recorded Video Utility in Admin Tools is now a separate software.
6. There is no longer a need to install the Admin Tools Certificate.
7. The following features have been added.
- Enhanced Digital Zoom
- Setting of Non-detection Area using Intelligent Function
- Simple Camera Settings
- Motion-Adaptive Noise Reduction
- ADSR (Area-specific Data Size Reduction ) during Bit Rate Control
- Setting of the Data Size Reduction Level in the ADSR function
- Mobile Camera Viewer
- Log Notifications
8. Added support for a rough setting of the detection area, when setting the Removed Object Detection.
9. Improved Scream Detection capabilities.
10. Added support for setting the maximum / minimum shutter speed when [Exposure] is set to [Auto], [Auto (Flickerless)] or [Auto (Aperture-priority AE)]
11. Added support for additional shutter speed of 1/50 sec.
12. Added support for changing of the Synchronization interval with the selected NTP server.
13. Added support for the viewing of the last successful sync time with the selected NTP server.
14. Added support for the viewing of camera angles set in the Preset, when setting the ADSR and Privacy Mask Setting Page.
15. Increased the maximum number of presets that can be set in a single tour, to 64 locations, in the Preset Tour.
16. Increased the maximum number of characters that can be used for the on-screen display, to 40.
17. Added a communications mode that only uses HTTPS, within [Encrypted Communications] selection.
18. Added support for SNMPv3.
19. Added support for TLS1.1/TLS1.2, and has suspended support for SSL3.0.
20. Added support for Group 5 and Group 14 in [DH Group] within [IPsec].
21. Limited the Viewer URI which could be used to publish video within a web pages which uses inline frames, to improve security.
22. Limited accessible directories that can be accessed via FTP, to improve security.
23. Removed support for NTP broadcast mode, to improve security.
24. Improved the connectability with some VMSs.
25. Added support for on-screen display of Japanese, French, Italian, German, Spanish, Russian, Turkish, and Polish languages.
26. Added support for Thai and Polish languages.

Ver. 1.0.9
1. Improved the sense of resolution, with reduced fringing and flaring.
There is a chance that under certain conditions, the amount of data will increase in comparison to before the update.
2. Improved the AF capability in low light.
3. Improved the AF capability when zooming.
4. Improved the connectability when using RTSP with some of the VMS.
5. Improved the connectability when using multicast transmission with some of the VMS.
6. Fixed a bug that would not allow the Recorded Video Utility to download certain recorded video files.
7. Corrected an issue where the recordings were truncated, when used with specific VMSs.

Ver. 1.0.3
1. Shorten the time it takes to view the Video List from the Recorded Video Utility.
2. Changed the listing order of the default Media Profile to increase the connectability with ONVIF.

Các yêu cầu hệ thống

Windows 8.1/Windows 8.1 Pro/Windows 8.1 Enterprise 32/64-bit
Windows 10 Pro/Windows 10 Enterprise/Windows 10 Education/Windows 10 Home 32/64-bit
Windows Server 2012 Standard 64-bit
Windows Server 2012 R2 Standard 64-bit
Windows Server 2016 Standard 64-bit

Chú ý

- Be sure to change the administrator password from the factory default settings.

- After completing the firmware update, the Camera Management Tool Ver.1.x cannot be used.

- When restoring factory default settings after updating the firmware, it is required to set [User name (Administrator ID)], [Administrator Name], and [Administrator Password]. Also set the camera registered information to the recorder, etc.

- Updating the firmware from the version earlier than Ver.1.1.5 may cause a bug on the display of Camera Viewer and Settings Page, due to Web browser cache. Please delete the cache of Web browser you are using.

- When updating the firmware from versions older than Ver. 1.1.0, the following limitations will apply:
1) While the top page will be no longer exist, the Setting Page or the Camera Viewer will be shown. You will also not be able to use a customized top page as before.
2) You will not be able to broadcast the video using the viewer's URI, when creating a web page with an inline frame.
3) The directories accessible via FTP will be limited."

- After completing the firmware upgrade, you will not be able to use the Proxy Authentication Admin Tools included on the CD-ROM.

- After completing the firmware upgrade, the camera's time settings may have changed. Reset the time on the settings page and reboot the camera.

Hướng dẫn cài đặt

1. Download the file to any folder.
2. Right-click the zip file, and then select Extract All to extract the file.
3. For further instructions, refer to Readme in the decompressed folder.

Thông tin tập tin

1. Tên tập tin: vbr11-v124.zip
2. Phiên bản tập tin: 1.2.4
3. Loại tập tin: zip
4. Kích cỡ tập tin: 27.88 MB

Tuyên bố miễn trừ trách nhiệm

Tất cả các phần mềm, chương trình (bao gồm nhưng không giới hạn trình điều khiển), tệp, tài liệu, hướng dẫn sử dụng, hướng dẫn hoặc bất kỳ tài liệu nào khác (gọi chung là "Nội dung") được cung cấp trên trang web này trên cơ sở "nguyên bản".

Canon Singapore Pte. Ltd., và các công ty liên kết của mình ("Canon") không đảm bảo dưới bất kỳ hình thức nào liên quan đến Nội dung, từ chối hoàn toàn tất cả các bảo đảm, được thể hiện rõ hoặc mang tính ngụ ý (bao gồm, nhưng không giới hạn, những bảo đảm được ngụ ý về khả năng bán được, sự phù hợp cho một mục đích cụ thể và tính không vi phạm) và sẽ không chịu trách nhiệm cập nhật, sửa chữa hoặc hỗ trợ Nội dung.

Canon bảo lưu tất cả các pháp quyền, quyền sở hữu và quyền sở hữu trí tuệ có liên quan trong Nội dung. Bạn có thể tải xuống và sử dụng Nội dung chỉ cho mục đích sử dụng cá nhân, phi thương mại và tự chịu rủi ro. Canon sẽ không chịu trách nhiệm cho bất kỳ thiệt hại nào liên quan đến Nội dung, (bao gồm, nhưng không giới hạn, thiệt hại gián tiếp, mang tính hậu quả, mang tính cảnh cáo hoặc những thiệt hại ngẫu nhiên).

Bạn không được phân phối, chuyển nhượng, cấp phép, bán, cho thuê, phát sóng, truyền tải, xuất bản hoặc chuyển giao Nội dung cho bất kỳ bên nào khác. Bạn cũng sẽ không (và sẽ không để người khác) sao chép, sửa đổi, định dạng lại, tách rời, dịch ngược hoặc đảo ngược kỹ thuật hoặc tạo ra các tác phẩm phái sinh từ Nội dung, toàn bộ hoặc một phần.

Bạn đồng ý không gửi hoặc đưa Nội dung ra khỏi quốc gia/khu vực nơi ban đầu bạn có được Nội dung đó đến các quốc gia/khu vực khác mà không có bất kỳ sự cho phép bắt buộc nào của chính phủ hiện hành và/hoặc vi phạm bất kỳ luật, hạn chế và quy định nào.

Bằng việc tiến hành tải xuống Nội dung, bạn đồng ý bị ràng buộc bởi những điều khoản trên cũng như tất cả các luật và quy định áp dụng cho việc bạn tải xuống và sử dụng Nội dung.