EOS R3 Firmware Update, Version 1.9.0 [macOS]

    03-thg 7-2025
    0401059802

    Tải về

    Tôi đã đọc và hiểu các tuyên bố miễn trừ trách nhiệm dưới đây
    và mong muốn tải về phần mềm được chỉ định

    OS

    • macOS 15
    • macOS 14
    • macOS 13

    Chi tiết

    Firmware Version 1.9.0 incorporates the following enhancements and fixes:
    1. Improves security features. A password must be set initially.
    •Adds the ability to review the history of any changes made to the password, network information, or other settings.
    *For more information, please refer to the 'Setting a Password' section in the Advanced User Guide on cam.start.canon.
    2. Enables firmware updates to be performed when the camera is connected to the internet and new firmware is made available on Canon servers.
    3. Adds a function that simultaneously protects images when they are rated.
    4. Adds the ability to use up to 8TB of CFexpress cards.
    Note
    - Cards larger than 8TB require low-level formatting by the camera.
    - Cards larger than 8TB are treated as 8TB cards.
    - Cards larger than 2TB cannot be used for firmware updating.
    5. Adds to lower the image capture frame rate to help prevent overheating when connected to CR-A100 in extended remote shooting.
    6. When transferring images with voice memos via FTP, the transfer order priority has now changed with voice memo (Wav) file being sent first followed by image file.
    If a voice memo is added to an image queued for transfer, the image and voice memo are now sent last.
    7. Improves AF tracking performance during zooming in still photo shooting with compatible lenses.
     *Compatible lenses (as of July 16, 2025):
     RF24-105mm F2.8 L IS USM Z (ver.1.1.0 or later)
     RF70-200mm F2.8 L IS USM Z
     RF100-300mm F2.8 L IS USM (ver.1.0.8 or later)
    8. Adds the ability to enable [Exposure Simulation] when a flash unit is attached.
    9. Fixes an issue in which Err70 may occur during Bluetooth communication due to interference from other Bluetooth devices.
    10. Fixes an issue in which Err70 may occur when repeatedly shooting in the "High-speed continuous shooting +" mode.
    11. Fixes an issue in which image stabilization may stop working when using an EF lens.
    12. Fixes an issue in which HDMI output may momentarily stop when [Screen Off] is activated in the Power Saving settings.

    If the camera's firmware is already Version 1.9.0, it is not necessary to update the firmware.

    Notes:
    Users manual in the WEB is updated accordingly. Please download the manual as well as the latest firmware. You can download it from the official WEB site.

    Preparations for a firmware update:
    After the downloaded compressed file (.dmg file) is extracted, a firmware folder is created.

    *Extracting the downloaded file:
    The downloaded folder is automatically extracted, and a firmware folder is created. If the download folder cannot be automatically extracted, double-click the folder.

    In the folder you downloaded are the firmware (EOSR3190.FIR / file size: 87,890,608 bytes) and instructions on the firmware update procedures (a PDF file in five languages: Japanese, English, French, Spanish, and Simplified Chinese). Before starting the firmware update operations, please be sure to carefully review the instructions to confirm your understanding of the firmware update procedures.

    (The following is the history of past firmware updates.)

    Changes in version 1.8.0:
    1. Adds [Protect Images] and [Rating] during FTP Transfer.
    2. Adds the ability to select [Wired] as a connection option when [Airplane mode] is set to [On].
    3. The following issues have been fixed.
     3-1.Fixes an issue, in which when Wi-Fi is disconnected, Err 70 occurs.
     3-2.Fixes an issue, in which when shooting subjects that are smaller in the frame, the card access indicator blinks and operations can no longer be performed.
     3-3.Fixes an issue, in which while operating both the touch function on the LCD monitor and a customized button, and then performing shooting, operations can no longer be performed.
     3-4.Fixes an issue, in which when performing shooting in high-speed continuous shooting + mode with the [Highlight Tone Priority] option set to [ON], focus may not be achieved when certain ISO speed settings are used.

    Changes in version 1.7.1:
    1. Enables servo zooming to be remotely controlled from EOS Utility or Camera Connect when Power Zoom Adapter PZ-E2/PZ-E2B is attached to a compatible lens.
    2. Enables up to 2 TB to be used on CFexpress cards larger than 2 TB.
    3. Enables the ability to set the camera as a receiver in EOS Multi Remote.
    4. Fixes an issue that may cause the camera, in rare instances, to stop functioning when using GPS.
    5. Fixes an issue that may display Error Code 70 when performing anti-flicker shooting at a shutter speed of 1 second or higher.
    6. Enhances security for FTPS (File Transfer Protocol Security) connections.
    7. Fixes an issue in which Mobile File Transfer may not function when connecting the camera to an iPhone compatible with USB 3.0 and higher.
    8. Fixes an issue that, under specific circumstances, may prevent the image from being displayed in the viewfinder or on the screen causing the camera to stop operating, or Error Code 70 may be displayed.
    9. Fixes minor issues.

    Changes in version 1.6.0:
    1. Adds support for RF-S10-18mm F4.5-6.3 IS STM lens.
    2. Fixes an issue that may cause the camera, in rare instances, to experience a delayed restart after the camera has gone into Auto Power Off.
    3. Fixes minor issues.

    Changes in version 1.5.1:
    1. Adds the ability to register the focus position in the preset functions of the CR-A100 Camera Remote Application.
    When used with the Robotic Camera System CR-S700R, it helps the user to focus on the intended subject distance when shooting.
    2. Adds the ability to erase voice memos added to images and to add voice memos to protected images.
    3. Adds the ability to check the time in the viewfinder by pressing the Exposure Compensation/Aperture button while looking through the viewfinder.  
    4. Adds enhanced security when transferring images via FTPS transfer.
    5. Fixes an issue, in which, after touchscreen operation, in rare circumstances, the camera operations cannot be performed, and even if the camera is operated, [BUSY] appears on the screen.
    6. Fixes an issue that, in rare instances, may result in the camera may not operating normally and having no viewfinder or screen display depending on the timing of operating the <AF-ON> button and viewfinder activation sensor.
    7. Fixes minor issues.

    Changes in version 1.4.1:
    1. Adds support for Speedlite EL-5.*
    *The automatic light intensity adjustment of the AF-assist beam is not supported.
    2. Adds [Register people priority] to the camera menu.
    Pre-registered people can now be detected and tracked with priority.**
    ** This feature may not operate if faces are too small to detect, in profile or turned at an angle or partially hidden; for scenes where the subject is moving; or due to certain shooting environments.
    3. Adds [Save/load comm. settings on card] to the camera menu.
    Network settings can now be transferred between cameras of the same model.
    4. Adds [Panning Assist] to the camera menu. When a compatible lens is used for panning shots, image stabilization and subject blur correction are applied during the exposure.
    5. Improves the Auto White Balance (AWB) setting to reduce the time it takes for the AWB result to be reflected in the camera’s viewfinder's display when looking through the viewfinder.
    6. Adds Protect Images During [FTP Transfer] to the camera menu. Images transferred via FTP can now be automatically protected. The user can determine if images have already been transferred via FTP.
    7. Fixes an issue in which Error 70 may occur when using the camera with certain EF lenses after having updated the camera firmware to Version 1.4.0.
    8. Fixes an issue in which the original tracking performance of Servo AF cannot be attained depending on shooting conditions when performing high-speed continuous shooting using the electronic shutter after having updated the camera firmware to Version 1.4.0.
    9. Fixes minor issues.

    Items 1-6, and 9 are changes of Version 1.4.0, and items 7 and 8 are additions of Version 1.4.1.

    Changes in version 1.3.0:
    1. The [User Def.] on [Picture Style] can now be selected in the Cloud Raw image processing settings.
    2. Fixes minor issues.

    Changes in version 1.2.2:
    1. Fixes an issue that, in rare instances, displays an Error Code 70 when the camera is capturing small subjects.
    2. Fixes an issue that, in rare instances, may result in image files not being recorded properly when the battery is removed from the camera while the power switch is set to <ON> or <LOCK>.

    Changes in version 1.2.1:
    1. Adds the ability to set "Custom high speed continuous" to the Drive mode. It is possible to shoot from 2 to 50 images continuously at a speed of approximately 30 to 195 fps.
    2. Adds the ability to select "FHD 239.76 fps/200.00 fps" in "High frame rate."
    3. 1- Adds the ability for in camera "Depth compositing" during "Focus bracketing."
    2- Adds Focus bracketing and depth compositing with a flash (Speedlite EL-1).
    4. Adds the ability of time-lapse movie recording. Note that the time-lapse movie setting is retained even if the camera enters the Auto Power Off state before starting time-lapse movie recording.
    5. Adds the ability of Cloud RAW processing functionality. RAW processing with the latest image processing technology is possible. This is a paid service that requires the purchase of a Canon Imaging App Service Plan, which will be available starting July 25, 2022.
    6. Adds the ability to convert multiple HEIF images into multiple JPEG images..
    7. Adds the ability to set [Still Image Crop/Aspect] to [Custom Controls]. The assigned button can be used to switch between crop and aspect ratio.
    8. Adds the ability to crop and resize images during transfer to an FTP server.
    9. 802.1X authentication/WPA2-Enterprise now supports the PKCS#12 certificate format.
    10. Adds an electronic shutter sound to be played when the mechanical shutter or electronic 1st-curtain is set.
    11. Enhances the performance of "Movie Digital IS". It stabilizes the image when taking selfies or walking shots using a wide-angle lens.
    12. Adds [Auto Power Off Temp.: Standard/High] to the menu for still shooting.
    13. Fixes an issue, which displays Error Code 70 on the camera, that may occur, in rare instances, when the [Disp. performance] setting is set to [Smooth].
    14. Fixes minor issues.
    15. Fixes an issue, in which, after having updated the camera to firmware Version 1.2.0, when performing the [Factory reset] operation, some shooting settings are not retained.

    Changes in version 1.1.1:
    1. Adds the ability to use Smart phone link adapter AD-P1.
    2. Adds the ability, when using EOS Utility or Browser Remote for remote shooting with two cards inserted, to set the recording method and select the card to be recorded to.
    3. Adds the ability to cancel [Subject Tracking] by pressing the Quick Control and then <INFO> buttons.
    4. Adds Ukrainian as an option to the language of "Browser Remote".
    5. Improves operation stability during FTP transfer.
    6. Fixes an issue that in rare instances, the camera may become inoperable when shooting in the Servo AF setting while operating the <AF-ON> button.
    7. Fixes an issue, in which the camera cannot be used as an access point if the camera is being used in a region that only support 2.4 GHz bandwidth for Wi-Fi connections.

    Thông tin tập tin

    1. Tên tập tin: eosr3-v190-mac.dmg
    2. Phiên bản tập tin: 1.9.0
    3. Loại tập tin: dmg
    4. Kích cỡ tập tin: 97676KB

    Tuyên bố miễn trừ trách nhiệm

    Tất cả các phần mềm, chương trình (bao gồm nhưng không giới hạn trình điều khiển), tệp, tài liệu, hướng dẫn sử dụng, hướng dẫn hoặc bất kỳ tài liệu nào khác (gọi chung là "Nội dung") được cung cấp trên trang web này trên cơ sở "nguyên bản".

    Canon Singapore Pte. Ltd., và các công ty liên kết của mình ("Canon") không đảm bảo dưới bất kỳ hình thức nào liên quan đến Nội dung, từ chối hoàn toàn tất cả các bảo đảm, được thể hiện rõ hoặc mang tính ngụ ý (bao gồm, nhưng không giới hạn, những bảo đảm được ngụ ý về khả năng bán được, sự phù hợp cho một mục đích cụ thể và tính không vi phạm) và sẽ không chịu trách nhiệm cập nhật, sửa chữa hoặc hỗ trợ Nội dung.

    Canon bảo lưu tất cả các pháp quyền, quyền sở hữu và quyền sở hữu trí tuệ có liên quan trong Nội dung. Bạn có thể tải xuống và sử dụng Nội dung chỉ cho mục đích sử dụng cá nhân, phi thương mại và tự chịu rủi ro. Canon sẽ không chịu trách nhiệm cho bất kỳ thiệt hại nào liên quan đến Nội dung, (bao gồm, nhưng không giới hạn, thiệt hại gián tiếp, mang tính hậu quả, mang tính cảnh cáo hoặc những thiệt hại ngẫu nhiên).

    Bạn không được phân phối, chuyển nhượng, cấp phép, bán, cho thuê, phát sóng, truyền tải, xuất bản hoặc chuyển giao Nội dung cho bất kỳ bên nào khác. Bạn cũng sẽ không (và sẽ không để người khác) sao chép, sửa đổi, định dạng lại, tách rời, dịch ngược hoặc đảo ngược kỹ thuật hoặc tạo ra các tác phẩm phái sinh từ Nội dung, toàn bộ hoặc một phần.

    Bạn đồng ý không gửi hoặc đưa Nội dung ra khỏi quốc gia/khu vực nơi ban đầu bạn có được Nội dung đó đến các quốc gia/khu vực khác mà không có bất kỳ sự cho phép bắt buộc nào của chính phủ hiện hành và/hoặc vi phạm bất kỳ luật, hạn chế và quy định nào.

    Bằng việc tiến hành tải xuống Nội dung, bạn đồng ý bị ràng buộc bởi những điều khoản trên cũng như tất cả các luật và quy định áp dụng cho việc bạn tải xuống và sử dụng Nội dung.