Việt Nam
Việt Nam
23-thg 7-2025
0401074702
Tôi đã đọc và hiểu các tuyên bố miễn trừ trách nhiệm dưới đây
và mong muốn tải về phần mềm được chỉ định
This firmware (Version 1.1.1) includes fixes for the following issues identified in Version 1.1.0:
1. Fixes an issue where video could not be recorded correctly when using a memory card larger than 2TB with the [Pre-recording] setting enabled.
This firmware also incorporates the following changes introduced in Firmware Version 1.1.0:
1. Improves security features. A password must be set initially.
•Adds the ability to review the history of any changes made to the password, network information, or other settings.
*For more information, please refer to the 'Setting a Password' section in the Advanced User Guide on cam.start.canon.
2. Enables firmware updates to be performed when the camera is connected to the internet and new firmware is made available on Canon servers.
3. Adds the ability to automatically detect Flicker at 100 or 120 Hz during Live View display.
4. Adds the ability to register focus position as a presets on the CR-A100 Camera Remote Application. This ability makes it easier to focus on subjects at the intended distance when the application is used with Robotic Camera System CR-S700R.
5. Adds the ability to select [Case Special] to expand Servo AF characteristics which is effective for subjects located behind a net in sporting events, such as badminton or volleyball.
6. Adds support for the Software Development Assistance Kit (EDSDK/CCAPI).
7. Adds a function that simultaneously protects images when they are rated.
8. Improves image stabilization control for lenses compatible with Peripheral Coordinated Control.
9. Adds support for the Software Development Assistance Kit (EDSDK/CCAPI).
10. Adds to lower the image capture frame rate to help prevent overheating when connected to CR-A100 in extended remote shooting.
11. When transferring images with voice memos via FTP, the transfer order priority has now changed with voice memo (Wav) file being sent first followed by image file.
If a voice memo is added to an image queued for transfer, the image and voice memo are now sent last.
12. Adds the ability to set the number of shots captured in pre-continuous shooting mode.
13. Adds the ability to set [Airplane mode] to shooting button customization.
14. Adds the ability to enable [Exposure Simulation] when a flash unit is attached.
15. Improved AF tracking during video capture for subjects that are difficult to focus on.
16. Fixes an issue in which Err70 may occur when enlarging an image after shooting with [Blackout-Free Display] set to "On" and [Servo 1st image priority/One-Shot AF release priority] set to "Release priority".
17. Fixes an issue in which Err70 may occur during Bluetooth communication due to interference from other Bluetooth devices.
18. Fixes an issue in which Err70 may occur when repeatedly shooting in the "High-speed continuous shooting +" mode.
19. Fixes an issue in which Err70 may occur immediately after startup when shooting with the electronic shutter.
20. Fixes an issue in which Err70 may occur during video recording in "FHD239.8P/200.0P".
21. Fixes an issue in which Error 70 may occur while filming in video mode with frame rate set to "50.00P" and [Movie Digital IS] set to "On" or "Enhanced".
22. Fixes an issue in which Err70 may occur during shooting when both [Pre-recording] and [Auto send] to image.canon are set to "Enable".
23. Fixes an issue in which the camera may stop functioning properly when [Image Review] is set to "Off" and the monitor entered low brightness mode after pre-continuous shooting.
24. Fixes an issue in which video recording may not be possible when using Remote Live View shooting in EOS Utility while outputting via HDMI.
25. Fixes an issue in which large RAW image files may not be transferred via Camera Connect.
26. Fixes an issue in which a horizontal line may appear momentarily in the viewfinder.
27. Fixes an issue in which the camera may not connect to Wi-Fi 7-compatible routers.
Contact a support representative regarding use of the Software Development Kit for digital cameras.
If the camera's firmware is Version 1.0.1, please update the firmware with only one memory card inserted into the camera.
If the camera's firmware is already Version 1.1.1, it is not necessary to update the firmware.
Notes:
Users manual in the WEB is updated accordingly. Please download the manual as well as the latest firmware. You can download it from the official WEB site.
Preparations for a firmware update:
After the downloaded compressed file (.zip) is extracted, a firmware folder is created.
*Extracting the downloaded file:
Right-click the zip file, and then select Extract All to extract the file.
In the folder you downloaded are the firmware (R5211100.FIR / file size: 258,938,688 bytes) and instructions on the firmware update procedures (a PDF file in five languages: Japanese, English, French, Spanish, and Simplified Chinese). Before starting the firmware update operations, please be sure to carefully review the instructions to confirm your understanding of the firmware update procedures.
(The following is the history of past firmware updates.)
Changes in version 1.0.3:
1. Optimizes the timing of when the warning indicator for the internal camera temperature appears.
2. Fixes an issue that may cause the focus to not be achieved during AF in certain zoom ranges.
Changes in version 1.0.2:
1. Incorporates support for frame rates of 23.98fps/24.00fps when using the LP-E6NH and LP-E6N battery.
2. The Wi-Fi connection status is now identifiable by the color of the [FTP Transfer Icon].
3. Adds [Protect Images] and [Rating] during FTP Transfer.
4. Adds the ability to change [Custom Shooting Mode] while writing images to the media (BUSY).
5. Fixes an issue in which the camera may become inoperable if a lens that does not communicate with the camera is attached when repeatedly shooting while using HDMI output.
6. Fixes an issue in which the camera may become inoperable if an image is cropped while other images are being transferred to an FTP server.
7. Fixes an issue in which Err70 may occur when using an application software such as Camera Connect, and the load on the smartphone increases.
8. Fixes an issue in which image stabilization may become unstable in movie mode when panning diagonally while using some stabilization rigs (such as monopod or handheld rigs).
9. Fixes an issue in which all images may not be copied when copying multiple selected images in the camera.
10. Fixes an issue in which another manufacturer devices (such as strobe or remote camera trigger) may work during pre-continuous shooting.
11. Fixes an issue that may, immediately after shooting, cause the screen to take a long time to turn off when using a button that has been assigned the "Screen off" function.
12. Fixes an issue in which Look File settings may apply to multiple custom picture files.
13. Fixes an issue in which the AF frame movement may not be smooth when several shooting information items are displayed and the multi-controller is operated.
14. Implements a fix to include custom pictures when saving camera settings.
15. Improves operation stability during network communication.
Changes in version 1.0.1:
1. Fixes an issue in which movies captured in RAW/SRAW format may not play back properly on applications due to the attached lens and camera not communicating.
2. Improves the stability of the touch operation control when the [Touch control] is set to [Sensitive].
3. Fixes an issue in which the camera's LCD display may become abnormal after the camera resumes operations from the [Viewfinder off] state.
4. Fixes an issue in which the camera may stop working properly when the shutter button is operated while the BUSY message is being displayed on the screen.
5. Fixes an issue in which Err70 may be displayed when the display mode is switched between the LCD screen and viewfinder while the BUSY message is being displayed on the screen.
6. Fixes an issue, in which the camera's LCD display becomes abnormal after using EOS Utility to capture and import movies.
7. Fixes an issue, in which movies captured using EOS Utility may not be played back on the camera.
8. Optimizes the auto white balance for specific environments when the Custom Picture function is set to [On].
Tất cả các phần mềm, chương trình (bao gồm nhưng không giới hạn trình điều khiển), tệp, tài liệu, hướng dẫn sử dụng, hướng dẫn hoặc bất kỳ tài liệu nào khác (gọi chung là "Nội dung") được cung cấp trên trang web này trên cơ sở "nguyên bản".
Canon Singapore Pte. Ltd., và các công ty liên kết của mình ("Canon") không đảm bảo dưới bất kỳ hình thức nào liên quan đến Nội dung, từ chối hoàn toàn tất cả các bảo đảm, được thể hiện rõ hoặc mang tính ngụ ý (bao gồm, nhưng không giới hạn, những bảo đảm được ngụ ý về khả năng bán được, sự phù hợp cho một mục đích cụ thể và tính không vi phạm) và sẽ không chịu trách nhiệm cập nhật, sửa chữa hoặc hỗ trợ Nội dung.
Canon bảo lưu tất cả các pháp quyền, quyền sở hữu và quyền sở hữu trí tuệ có liên quan trong Nội dung. Bạn có thể tải xuống và sử dụng Nội dung chỉ cho mục đích sử dụng cá nhân, phi thương mại và tự chịu rủi ro. Canon sẽ không chịu trách nhiệm cho bất kỳ thiệt hại nào liên quan đến Nội dung, (bao gồm, nhưng không giới hạn, thiệt hại gián tiếp, mang tính hậu quả, mang tính cảnh cáo hoặc những thiệt hại ngẫu nhiên).
Bạn không được phân phối, chuyển nhượng, cấp phép, bán, cho thuê, phát sóng, truyền tải, xuất bản hoặc chuyển giao Nội dung cho bất kỳ bên nào khác. Bạn cũng sẽ không (và sẽ không để người khác) sao chép, sửa đổi, định dạng lại, tách rời, dịch ngược hoặc đảo ngược kỹ thuật hoặc tạo ra các tác phẩm phái sinh từ Nội dung, toàn bộ hoặc một phần.
Bạn đồng ý không gửi hoặc đưa Nội dung ra khỏi quốc gia/khu vực nơi ban đầu bạn có được Nội dung đó đến các quốc gia/khu vực khác mà không có bất kỳ sự cho phép bắt buộc nào của chính phủ hiện hành và/hoặc vi phạm bất kỳ luật, hạn chế và quy định nào.
Bằng việc tiến hành tải xuống Nội dung, bạn đồng ý bị ràng buộc bởi những điều khoản trên cũng như tất cả các luật và quy định áp dụng cho việc bạn tải xuống và sử dụng Nội dung.