Using the Self-timer (EOS M)

23-thg 8-2012
8201598300

Giải pháp

    The self-timer is useful when you want to photograph yourself or prevent camera shake caused when the shutter is released.

    1. Set the power to <ON>.

    2. Press </> button.



    3. Tap the self-timer.



    : 10-sec. self-timer. The remote controller can also be used.
    : 2-sec. self-timer
    : 10-sec. self-timer plus continuous shots. Press <Main Dial> to set the number of multiple shots (2 to 10) to be taken with the self-timer.

    4. Focus the subject, then press the shutter button completely.



    • You can check the self-timer operation with the self-timer/AF-assist beam, beeper, and countdown display (in seconds) on the LCD monitor.
    • Two seconds before the picture is taken, the self-timer/AF-assist beam will light up and the beeper will sound faster.

    To cancel the self-timer shooting:
    Press the </> button or set the power to <OFF>.
    (To cancel the self-timer setting, press the </> button and tap [ ] or [ ].)
    CAUTION
    • With [ ], the interval between the multiple shots may be prolonged depending on the shooting functions settings such as the imagerecording quality or flash.
    • When you use a Creative Filter and shoot, even if you set the drive mode
    • to [ ] (Self-timer: Continuous), single shooting will take effect.
    NOTE
    • After taking self-timer shots, playing back the image to check focus and exposure is recommended.
    • When using the self-timer to shoot only yourself, use focus lock on an object at about the same distance as where you will stand.