Giải pháp
Inserting the Battery and Memory Card
To insert the included battery and a memory card (sold separately), follow these steps.
REFERENCE
Note that before using a new memory card (or a memory card formatted in another device), you should format the memory card with this camera.
1.Check the card’s write-protect tab.
Recording is not possible on memory cards with a write-protect tab when the tab is in the locked (downward) position.
Slide the tab up until it clicks into the unlocked position.
2.Open the cover.
Slide the cover (
) and open it (
).
3.Insert the batteries.
Insert the batteries as shown.
4.Insert the memory card.
Insert the memory card facing as shown until it clicks into the locked position.
Make sure the memory card is facing the right way when you insert it. Inserting memory cards facing the wrong way may damage the camera.
5.Close the cover.
Lower the cover (
) and hold it down as you slide it, until it clicks into the closed position (
).
Remove the memory card.
Push the memory card in until it clicks, and then slowly release it.
The memory card will pop up.
IMPORTANT
Use AA alkaline batteries or Canon AA NiMH batteries (sold separately).
NOTE
- Due to the variations in performance of other batteries, use of specified batteries only is recommended.
- NiMH batteries last longer in cameras than alkaline batteries do, especially in cold weather.
Việt Nam
