Khách hàng cá nhân Khách hàng doanh nghiệp
ENG Việt
Khách hàng cá nhân
Chuyển sang: Khách hàng doanh nghiệp
Bảo hành Hỗ trợ
ENG Việt
  1. Hỗ trợ
  2. Tìm kiếm
  3. Tải về
Liên hệ

    Begin recording using self-timer (Movie Self-Timer) (EOS M200)

    13-thg 9-2019
    8204664100

    Giải pháp

    Movie recording can be started by the self-timer.

    1. Turn the camera on.



    2. Set the shooting mode switch to < >.



    3. Press the < > button.



    4. Press the < > < > buttons to select the [ ] tab, and press < >.
    　

    5. Press the < > < > buttons and select the [ ] tab.



    6. Press the < > < > buttons to select [ Movie self-timer ], and press < >.
    　

    7. Press the < > < > buttons to choose [ 10 sec ] or [ 2 sec ], then press < > button.



    8. After you tap [ ] or press the movie shooting button, the camera beeps and displays number of seconds left before recording.
    　

    Remote Shooting with Wireless Remote Control BR-E1 (Sold Separately)
    1. Turn the camera on.



    2. Press the < > button.



    3. Press the < > < > buttons to select the [ ] tab, and press < >.
    　

    4. Press the < > < > buttons and select the [ 1 ] tab.


    NOTE
    • If Airplane mode is [On], turn it to [Off].

    5. Press the < > < > buttons to select [ Bluetooth settings ], and press < >.
    　

    6. Press the < > < > buttons to select [ Bluetooth ], and press < >.



    7. Press the < > < > buttons to select [ Enable ], and press < >.



    8. Press the < > button.

    9. Press the < > < > buttons to select [ Wi-Fi/Bluetooth connection ], and press < >.



    10. Press the < > < > buttons to select [ Connect to Wireless Remote ], and press < >.


    NOTE
    • If the history is displayed, switch the screen with the < > < > keys.

    11. Press the < > < > buttons to select [ Add a device to connect to ], and press < >.



    12. Press and hold the BR-E1's <W> button and <T> button simultaneously for 3 sec. or more.
    　

    13. After a message confirms that the camera is paired with the BR-E1, press < >.



    14. In [Remote control] on the [ ] tab, select [Enable].



    15. Set the release timing/movie shooting switch on the remote controller to the <> position.

    16. When you press the release button on the remote controller, the camera beeps and displays number of seconds left before recording.
    IMPORTANT
    • Bluetooth connections consume battery power even after the camera’s auto power off is activated.
    NOTE
    • When you do not use the Bluetooth function, setting [Bluetooth settings] to [Disable] in step 7 is recommended.