LV-WX300USTi

Model name LV-WX300USTi
Display system 1-Chip DLP
Optical system Time division colour extraction, sequential display
Display device  
Type DMD x 1
Size / Aspect ratio 0.65 type / 16:10
Number dots / Total Number dots

1,024,000 (1280 x 800)

Projection lens  
Zooming / Focusing system Fixed / Manual
Focal length / F value 5.1mm / 2.5
Throw ratio 0:35:1
Projection distance 60.2 – 76.6cm
Lens shift 75%, fixed
Light source 230W Super-high pressure mercury lamp
Image size 80 – 100 type
Number of colours 16,770,000 colours (full colour)
Brightness*1 3000 lumen (presentation mode)
Contrast ratio*1 7500:1 (Fully white:fully black, presentation mode)
Ratio of brightness at periphery to center*1 80%
Speaker 10W x 2 (stereo)
Maximum input resolution 1600 x 1200
Video signals  
Analog PC input UXGA / SXGA+ / WXGA / SXGA / XGA / SVGA / VGA / MAC
Digital PC input UXGA / SXGA+ / WXGA / SXGA / XGA / SVGA / VGA
Digital video 1080p / 1080i / 720p / 576p / 480p
Component video input 1080p / 1080i / 720p / 576p / 576i / 480p / 480i
Video / S video input NTSC / PAL / SECAM / NTSC4.43 / PAL-M / PAL-N / PAL-60
Audio Signal Impedance = 47kΩ or more
Input terminal  
HDMI x 2 Digital PC, digital video input
Mini D-sub 15 x 2 Analog PC, Component video input
Mini DIN4 S-video input
RCA Video input
2RCA Audio input
AUDIO IN Audio input (3.5φ stereo mini jack)
Output terminal  
Mini D-sub 15 Monitor out
AUDIO OUT Audio output (3.5φ stereo mini jack)
Control terminal  
RJ45 Network connection (100BASE-TX / 10BASE-T)
USB type B USB connection
Dsub9 RS-232 connection
USB type A USB connection for interactive function
USB mini B USB connection for optional module
Noise 33 / 29dB (Lamp mode: Full power / Power saver)
Operating temperature 5°C (41°F) to 40°C (104°F)
Power supply AC100V - 240V, 50 / 60Hz
Power consumption 300W / 240W (Lamp mode: Full power / Power saver)
Standby power consumption 6.0W / 0.5W (Low power mode: OFF / ON)
Dimensions (W x D x H) W: 287.5mm, H: 193.7mm, D: 374.5mm (including protrusion)
Weight 5.0kg (11lbs)
Accessories Remote control with battery (LV-RC10), power cord, VGA cable, USB cable, Interactive Pen with battery, PC software (CD-ROM), User's Manual, Important Information and Warranty Card
Optional Projector Remote Controller (with battery) LV-RC10
Projector Remote Controller (with battery) LV-RC9
Wall-mounting Bracket LV-WL02
Finger-Touch Module
Replacement parts Replacement Lamp

Specifications are subject to change without notice.
   
Compliance with ISO21118-2012