Firmware RC-IP1000 Ver. 1.3.1

13-thg 11-2026
45.33 MB
0401223102
Tải về

Tôi đã đọc và hiểu các tuyên bố miễn trừ trách nhiệm dưới đây
và mong muốn tải về phần mềm được chỉ định.

Hệ điều hành

Windows 11
macOS 26

Ngôn ngữ

Chi tiết

Firmware Version 1.3.1 incorporates the following enhancements:
1. Improved Stream Deck connectivity.

Refer to the RC-IP1000 Settings Guide for instructions on updating the firmware.

<Firmware file>
- rcip1000-v131.rom

The firmware contains software modules developed by third parties.
For details and license conditions for each module, see ReadMe-E.txt in the downloaded file and rcip1000-ossinfo.pdf in the "ThirdPartySoftware" folder in the "LICENSE" folder.

Lịch sử cập nhật

Ver. 1.3.0
1. Adds support for the latest firmware versions of compatible Remote Cameras.
CR-N700 (Ver. 1.7.0), CR-N500 (Ver. 1.8.0), CR-N400 (Ver. 1.1.0), CR-N350 (Ver. 1.1.0), CR-N300 (Ver. 1.8.0), CR-N100 (Ver. 1.3.0), and CR-X300 (Ver. 1.5.0).
2. Adds support for the latest versions of Add-on Applications. Auto Tracking Application RA-AT001 (Ver. 1.4.0) and Auto Loop Application RA-AL001 (Ver. 1.2.2).
3. Adds support for EOS C50 (Ver. 1.0.4.1).
4. Adds support for Standard Communication (Serial).
5. Expands the functions available through Elgato Stream Deck integration.
- Preset selection
- Auto Tracking Application launch
- Auto Tracking start/stop
- Auto Loop Application launch
- Trace function
- Camera Select Link Mode
6. Expands Voice Control settings.
7. Expands the PT Curve adjustment range. Enables faster pan and tilt movement response at the start of operation.
8. Adds display support for the Auto Exposure Ramping Compensation function.
- When a CINE-SERVO Lens (EF/RF) is attached to the EOS C400, the camera automatically compensates for light loss during zoom operation. RC-IP1000 can display the compensation value separately from the total value (configured value + compensation value).
9. Adds a user interface for regulatory compliance.
10. Enables selection of the video display aspect ratio.
11. Adds support for the Capture Mode function. Existing [Custom Picture] settings can now be selected from [Capture Mode].
12. Fixes minor issues to improve overall stability and performance.

Ver. 1.2.1
1. Improves system stability during high-frequency operations.

Ver. 1.2.0
1. Adds support for the following latest versions of remote PTZ camera's firmware: CR-N700 (Ver. 1.6.0), CR-N500 (Ver. 1.7.0), CR-N300 (Ver. 1.7.0), CR-N100 (Ver. 1.2.0),
CR-X300 (Ver. 1.4.0)
2. Adds support for the following latest version of add-on applications: Auto Tracking Application RA-AT001 (Ver. 1.3.0)
3. Adds support for the EOS C80.
4. Enables the ability to START / STOP add-on applications and control their auto-start ON / OFF.
5. Adds the ability to register a preset by pressing and holding the PRESET Select Button on the touch panel.
6. Adds a new layout to the Preset List.
7. Adds the ability to select ON / OFF for IP video reception.
8. Enables assigning external output video switching to the USER button.
9. Enables camera number selection using Elgato Stream Deck even when the main unit is in [PRESET / GROUP] mode.
10. Enables control of cameras with the same IP address within a camera group by distinguishing them using port numbers.
11. Adds a setting to disable user authentication for the XC protocol communication server function.
12. Adds an ExCAM operation UI.
13. Adds the ability to Enable / Disable High Bit Rate Streaming for RTP.

Ver. 1.1.1
1. Fixes an issue, in which when operating dials or buttons while the PICTURE screen is being displayed, the display may get corrupted.

Ver. 1.1.0
1. Adds support for the latest remote PTZ camera's firmware.
  CR-N700 (Ver. 1.4.0), CR-N500 (Ver. 1.5.0), CR-N300 (Ver. 1.5.0), CR-N100 (Ver. 1.1.0), CR-X300 (Ver. 1.3.0)
2. Adds support for the latest version of add-on applications.
  Auto Tracking Application RA-AT001 (Ver. 1.2.2), Auto Loop Application RA-AL001 (Ver. 1.2.0).
3. Adds support for EOS C400.
4. Adds support for the latest video camera's firmware.
  EOS C500 Mark II (Ver. 1.1.2.1), EOS C300 Mark III (Ver. 1.0.8.1), EOS C70 (Ver. 1.0.9.1), XF605 (Ver. 1.0.4.1)
5. Adds function for preset/ trace thumbnail display.
6. Enables the ability to output [IP Multi View] and [Preset/ Trace List] to SDI and HDMI.
7. Adds functions of touch operation for switching target of auto tracking and moving silhouette position.
8. Adds function for focus guide display during manual focus.
9. Adds function for Shooting Information Display on PICTURE Screen.
10. Adds function for Assist settings (Waveform Monitor display, Vectorscope display, Marker display).
11. Adds new function "Touch Function" on the PICTURE screen.
12. Adds functions for copying camera settings and backup/ restore.
13. Adds support for Elgato Stream Deck.
14. Adds support for XC protocol control from external devices.
15. Adds new function "ExCAM".
16. Changes the setting when assigning Zoom to F5 dial.
  - Turn clockwise: Zoom in
  - Turn counterclockwise: Zoom out
17. Changes the upper limits of [LCD Brightness] to 10 and [LED Brightness] to 7 when [LCD/ LED Bright. Restrict.] is selected in [PoE+ Restrictions].
18. Adds [Disable Front USB] to [PoE+ Restrictions].
19. Adds [Chinese] to selectable languages.

Ver. 1.0.1
1. Fixes an issue where the RC-IP1000 may not start depending on the PoE power sourcing equipment.

Các yêu cầu hệ thống

Windows 11
macOS 26

Chú ý

Do not turn off the power to the controller while performing the firmware update.
Update the camera, application, controller to the latest firmware.
For versions 1.0.0 through 1.1.1, please update the firmware to version 1.2.1 before updating to version 1.3.1.


Hướng dẫn cài đặt

1. Download the file to any folder.
2. Extract files from a compressed file (ZIP file).
3. For further instructions, refer to the RC-IP1000 Settings Guide for instructions on updating the firmware.


Thông tin tập tin

  1. Tên tập tin: rcip1000-v131.zip
  2. Phiên bản tập tin: 1.3.1
  3. Loại tập tin: zip
  4. Ngôn ngữ tập tin: EN,ZH,JA
  5. Kích cỡ tập tin: 45.33 MB

Tuyên bố miễn trừ trách nhiệm

Tất cả các phần mềm, chương trình (bao gồm nhưng không giới hạn trình điều khiển), tệp, tài liệu, hướng dẫn sử dụng, hướng dẫn hoặc bất kỳ tài liệu nào khác (gọi chung là "Nội dung") được cung cấp trên trang web này trên cơ sở "nguyên bản".

Canon Singapore Pte. Ltd., và các công ty liên kết của mình ("Canon") không đảm bảo dưới bất kỳ hình thức nào liên quan đến Nội dung, từ chối hoàn toàn tất cả các bảo đảm, được thể hiện rõ hoặc mang tính ngụ ý (bao gồm, nhưng không giới hạn, những bảo đảm được ngụ ý về khả năng bán được, sự phù hợp cho một mục đích cụ thể và tính không vi phạm) và sẽ không chịu trách nhiệm cập nhật, sửa chữa hoặc hỗ trợ Nội dung.

Canon bảo lưu tất cả các pháp quyền, quyền sở hữu và quyền sở hữu trí tuệ có liên quan trong Nội dung. Bạn có thể tải xuống và sử dụng Nội dung chỉ cho mục đích sử dụng cá nhân, phi thương mại và tự chịu rủi ro. Canon sẽ không chịu trách nhiệm cho bất kỳ thiệt hại nào liên quan đến Nội dung, (bao gồm, nhưng không giới hạn, thiệt hại gián tiếp, mang tính hậu quả, mang tính cảnh cáo hoặc những thiệt hại ngẫu nhiên).

Bạn không được phân phối, chuyển nhượng, cấp phép, bán, cho thuê, phát sóng, truyền tải, xuất bản hoặc chuyển giao Nội dung cho bất kỳ bên nào khác. Bạn cũng sẽ không (và sẽ không để người khác) sao chép, sửa đổi, định dạng lại, tách rời, dịch ngược hoặc đảo ngược kỹ thuật hoặc tạo ra các tác phẩm phái sinh từ Nội dung, toàn bộ hoặc một phần.

Bạn đồng ý không gửi hoặc đưa Nội dung ra khỏi quốc gia/khu vực nơi ban đầu bạn có được Nội dung đó đến các quốc gia/khu vực khác mà không có bất kỳ sự cho phép bắt buộc nào của chính phủ hiện hành và/hoặc vi phạm bất kỳ luật, hạn chế và quy định nào.

Bằng việc tiến hành tải xuống Nội dung, bạn đồng ý bị ràng buộc bởi những điều khoản trên cũng như tất cả các luật và quy định áp dụng cho việc bạn tải xuống và sử dụng Nội dung.